Home > News > Content

Non-pressurized Solar Water Heaters Improve The Quality Of Hot Water Discharge

The pressure-free solar water heater makes the pressure-free automatic first out of hot water solar water heaters, the negative pressure in the water tank is not damaged within the scope of the water tank, so that the pressure-free solar water heaters run safely.

Pressure-free solar water heaters, including the existing technology water tanks and water tanks and water inlet and outlet pipes, the inlet pipe is provided with a surface controller, Non-pressurized Solar Water Heater located at the top of the water tank with a ventilation tube, a one-way valve on the trachea, the innovation point is to set up the isolation board in the water tank Divide the water tank into the left ventricle and the right ventricle where the outlet pipe is located. A connecting tube is arranged between the two chambers, Non-pressurized Solar Water Heater the inlet of the connecting pipe is positioned in the left chamber of the inlet pipe and the outlet of the connecting pipe in the right ventricle is lower than that in the water tank, and a ventilation tube is arranged at the top of the left ventricle. This setting allows the negative pressure in the right chamber of the outlet pipe to be in the safe operation range of the water tank, thus solving the above problems.

No pressure solar water heaters compared with the existing technology, the beneficial effect is due to the water tank isolation plate, the setting of the connecting pipe and the pass pipe ensures that the maximum negative pressure in the water tank is equivalent to the pressure value formed by the inlet of the connecting pipe in the water tank and the height difference of the outlet saliva, Non-pressurized Solar Water Heater so that the water tank is in a safe operation state; From entering the water pipe into the left indoor cold water, by the barrier, will sink to the lower level, only the upper hot water through connected to enter the lower layer of the right room, Non-pressurized Solar Water Heater this setting to ensure the right indoor upper hot water area of calm, improve the quality of hot water discharge.

Solar water heaters without pressure, its structure includes the existing technology of water tank 4 and the water tank 4 on the inlet pipe 6 and outlet 13, inlet pipe 6 is set on the Surface Controller 3, the top of the tank 13 above the pipe outlet 4 is provided with a pipe 8, and a one-way valve 8 is arranged on the pipe, Non-pressurized Solar Water Heater Its innovation point is in the water tank 4 installed the isolation board 11, the isolation Board ll water Tank 4 into the inlet tube 6 in the left ventricle and the outlet pipe 13 right room, the top of the left ventricle is equipped with a 1, the left ventricle and the right ventricle are connected with the connecting tube 5, Non-pressurized Solar Water Heater and the water inlet 2 on the connected 5 of the left ventricle must be positioned Must be above the outlet of the right ventricle 12 and below the water surface position 9.

Before the isolation plate 11, the connecting pipe 5 and the vent tube 1 are not set within the tank 4, when the outlet 13 water, water inlet 6 installed on the surface of the controller 3 of the valve will open water, as soon as the supply is low, the pipe 8 installed on the one-way valve 7 will be closed, Non-pressurized Solar Water Heater outside the air can not enter the tank 4 to add, As a result of solar water heaters to the bathroom distance is very long, the length of the pipe 12 ^-like between a few meters to more than 10 meters, if the water pressure is very low, the outlet pipe 13 of the strong pull of the water tank 4 to produce a large negative pressure may result in tank 4 damage.